How to Get Your Car Started In A Subzero Weather

If you are unable to start your car in a subzero temperature which has gripped most parts of the country, this is the good time to get your car started in this rigid weather.

NHTSA provides winter driving tips

The best thing to take car in order to start your car in freezing weather is to ensure that the charging system of the car’s battery is in good condition and the engine is operating on the oil recommended by the manufacturer.

According to Mike Calkins, manager of technical services for the travel group’s national office, suggests that the performance of your car in extreme weather will improve is an engine block heater or an electric battery blanket is added in the anti-winter battery. In winter, the functioning of car batteries are less effective whereas, the load of the engine is greater as the consistency of the oil is thicker. In case the engine is cranking slowly, then you should check the battery especially is the battery is being operated for more than three years.

He further added that the capacity of the battery reduces in winter temperatures. The electrons within the battery slow down and the chemical reaction within the battery which creates electricity is slowed down when it is cold. Moreover, the charging system and the alternator should also be checked along with the cleaning of the battery terminals ensuring that the cables are under good condition as well.

Making use of the right quality of oil is very crucial because most of the modern engines manufactured demand high viscosity oil like 5W-20 which have the consistency to flow easily in cold weather. On the other side, there are vehicles which demand heavier oils like 10W-30 however, according to Calkins, heavier oils impose strain on the battery and starter motor. Moreover, it can increase motor wear as flowing in a normal rate takes much time.

Installing electric battery blankets can help in reduce or prevent the loss of reserve cranking power that occurs due to frigid temperatures. The prices vary from 425 to that of $100.

Another effective thing can be the engine block heater as its functioning is to provide warn air to the heater which not only defrosts outlets but, makes the engine easy to start as well. Alaska and anchorage are the cities where engine block heaters are used the most. Their prices vary from $150 – $200 inclusive of installation. A traditional way of dealing with cold weathers is to use alcohol-based gas-line antifreeze which tends to absorb moisture within the fuel system however; nowadays they are not much useful. Calkins also refused other traditional methods such as covering the car hood with a blanket or tarp along with parking the car in shelter.

Other recommendations given by related to winter driving includes:

  • The defroster and the heater should be under perfect working conditions so as to protect the windows and the windshield to get frosted up.
  • The cooling system should be a combination of water and antifreeze so as to enable freeze protection.
  • Emergency gear system should be installed even if the car is under proper winter maintenance.

Composite Manufacturing: Why the Industry Is Growing

Composite manufacturing is a growing industry, even in these tough economic times. Established companies, who have recognized product lines, are looking to expand their opportunities. New companies are springing up to take advantage of new demands. Wind energy is a new demand that has provided new opportunities for manufacturers, of every size. Composite materials have many uses, with new applications being developed at a rapid pace.

Composite materials are generally associated with boats, because its used to enhance the boats features. Composite material allows for sleek hulls and are used on innovations designed to make boats faster. Whether an individual is a boating enthusiast or a competitor, they are aware of the beauty and strength, that modern composite materials provide. Unknowingly, casual observers have even observed the beauty and technology that composite manufacturing has brought to the boating industry.

People may also be aware of these materials are used in airplanes. Large passenger planes to small hobby planes sold in a box, all require composite materials in the manufacturing process. Composite manufacturing is responsible for parts used in the production of aircraft also, from the fuselage to the wingtip. As in the boating industry, composite materials used in aviation combine light weight with high strength. The benefits of these materials are not just in their efficiency and strength, but in their beauty as well.

People may not be aware of the various uses of it, in areas outside of the boating and aeronautic industry. One of the newest growing uses of composite materials is in the growing field of alternate energy.

Alternate energy, be it marine, solar or wind generated, benefits from materials that are strong and reliable. Which is why they are being manufactured using composite materials as the composite manufacturing industry grows. The alternate energy industry, with grants available from both the public and private sectors, represents an opportunity for both growth and profit in the industry.

Composite manufacturing is also responsible for innovations in the area of furniture, both for individual consumers and businesses. Manufacturers, using carbon fabricated materials, can create beautiful and innovative designs that could not be easily made using other manufacturing processes. These materials give designers new options to create furniture that isn’t just beautiful, but multi- functional too.

For manufacturers, in every area, be it marine, aeronautic, energy, furniture or in new applications of composite materials, the process can be easily adaptable to changing lines with minimal expense. It encourages innovation and creativity, while minimizing costs. This process produces materials that are strong, reliable and visually pleasing too. This makes composite manufacturing a win win opportunity for the designer, the manufacturer and the consumer.

Purpose-designed, Vacmobiles are complete “ready-to-go” vacuum systems for a wide range of composite manufacturing applications. Now proven in more than 35 countries worldwide, Vacmobiles are reliable, versatile and affordable.

Hand Wash Only?

Nothing is more annoying than getting a stain on that favorite silk blouse or cashmere sweater — except looking at the tag and finding the three words everyone dreads: “Hand wash only.” Don’t give up on your garment just because of a few words; try some tips and tricks that make hand-washing a breeze.

Things Aren’t Always What They Seem

Before pulling that detergent out, consider that it may not be time to wash just yet. Though hand-wash-only clothing tends to be more delicate, it can typically stand up to three to four wears before it’s time to clean it, according to Athelia Woolley, co-owner and head designer of Shabby Apple, an online dress boutique. “Hand-wash-only fabrics are almost always made of natural fibers, like 100-percent silk or cashmere or wool, and those fabrics don’t get soiled easily,” she says.

Also, depending on the type of fabric, hand-washing may not be your only option. Many clothes that carry a hand-wash-only tag may actually be machine-washable, according to experts including Woolley and Krystal Savanella, fashion designer and owner of Krystal Savanella Designs House of Couture, a high-end clothing label based in Ventura, California. They say the labeling typically serves to protect the clothing manufacturer from liability in case something goes wrong in the washing machine.

“The majority of the time a manufacturer suggests ‘hand wash only’ due to beading or another type of embellishment or a fiber or fiber blend that is delicate and might shrink or change properties, such as a fuzzy sweater,” explains Savanella.

So, when is the right time to hand wash your garments? Take it on a case-by-case basis. When it comes to sweaters, antique clothing or clothing with embellished features, like jewelry, sequins or other beading, stick to hand-washing only.

For natural fibers like silk, wool or cashmere, the rules can vary, depending on with whom you talk. Some say they can handle the machine, in a cold wash on the gentle cycle, but Savanella advises leaving those fabrics to the professionals. “I have the rule never to wash silk or wool [in water],” she says, “even if it says hand-washing is OK. Dry clean only.”

Mistakes to Avoid

Sometimes hand-washing can be a frustrating process, especially when you don’t get the results you want. Leslie Reichert, cleaning expert and author of “The Joy of Green Cleaning,” shares some common mistakes to avoid.

First, never use hot water; go with water at cool, cold or lukewarm temperatures. Make sure the sink is clean, or dedicate a special tub to hand-washing. And always add the soap to the water before placing the clothing in, not afterward.

If there’s a stain on your piece, pretreat it the old-fashioned way before you hand wash it. “Back in the day, they used an old-fashioned soap and a small brush,” Reichert explains. “Depending on the fabric, rub the soap into the spot and, if the fabric can take it, brush it in on both sides of the spot.”

If the piece is really dirty, let it soak overnight in cold water before hand-washing it. Once it’s time to wash, fill up the sink about three-fourths full and follow the directions that came with the detergent. Or alter the instructions to suit your needs. “I use like three-fourths of the amount that the instructions recommend,” says Woolley.

Reichert advises that when washing more than one item, never mix colors. Just as with machine-washing, the colors can bleed into each other. Rinse the garment as many times as it takes to remove all the soap, but never wring a piece of clothing. Gently squeeze or pat it to remove suds. Place especially delicate items on a screen and then soak the screen in the water to rinse.

Finishing Touches

If commercially popular detergents are too harsh on your garment, try a very gentle dish soap or laundry soap, Reichert suggests. “Originally, soap was made with animal fat, but now there’s olive oil- and vegetable-based soaps out there,” she says. “I use soap flakes.” This type of soap can be hard to find, but green cleaning stores and websites carry it.

Drying your hand-washed clothing properly can be just as crucial as the cleaning process. Reichert says always lay the clothing flat to dry, either on a clean white towel or a raised mesh or netted drying rack that allows the garment to lay flat. Never hang sweaters, but instead use what Reichart calls a “blocking” technique in which you lay the sweater on a clean towel and roll it up to get rid of excess water, then lay it flat to dry. This keeps the sweater from becoming misshapen.

Once the item is mostly dry, you can even toss it in the dryer, but set it to tumble dry only, Salvanella says. Again, do not use this technique with antique or embellished clothing or knitwear if you want to maintain its original shape and style.

Travel to Canada, but Should You Become A Canadian Resident?

Why Become a Canadian Permanent Resident? That’s one question you may already be wondering, especially if you’ve done some research into what the process requires. It isn’t easy to become a permanent resident, after all.

Plus, there are other options available if you want to work or study in Canada. Short-term, temporary visas are issued to workers and students that allow them to live and work in Canada.

So why become a permanent resident? The answer is simple: you’ll have more rights.

When you become a permanent resident of Canada, you are entitled to most of the sam e rights and privileges as a Canadian citizen. Below is a list of a few of these rights:

  • You are entitled to equal treatment and equal protection.
  • You are entitled to certain legal rights, such as; to be presume innocent until proven guilty, to be provided with an interpreter in the courtroom, if necessary, to have a lawyer.
  • You have the right to enter and exit Canada as you see fit, plus you can move freely from province to province.
  • You can work and study anywhere you choose in Canada (you cannot hold some high-security government positions, however.)

While most of these rules also apply to temporary Canadian residents, there are some social service benefits that are only or primarily designed to help permanent residents and citizens of Canada.

These benefits include, but are not limited to, the following:

  • Canada Child Tax Benefit (CCTB) – For families with children under the age of 18 who are considered to have a low-income, the Canadian government provides monthly tax-free payments to help cover expenses.
  • Old Age Security, Guaranteed Income Supplement, and Canada Pension Plan – All three of these programs are designed to provide financial support to workers after they reach retirement age – currently age 65. To be eligible, you have to meet specific residency requirements and to have contributed to the system by paying taxes in Canada. However, most permanent residents will qualify for at least partial payments from these programs.
  • Universal health care – Most necessary medical expenses are covered through the Canadian universal health care program. These expenses include visits to emergency room, immunizations, yearly exams, etc.
  • Free education – All children under 18 are entitled to a free education in the Canadian public school system.
  • Maternity and parental leave – In Canada, working parents are given time off when a new baby is born or adopted. Women can take up to 12 months of maternity leave and receive 50 to 65% of their normal income. Partially paid parental leave is also available for up to 35 weeks. One parent can take all 35 weeks or both parents can split the allotment of time (i. e. one parent takes 20 weeks while the other takes 15 weeks). To be eligible for parental leave, you must have worked in Canada for at least 600 hours.

All of these benefits and more become available to you when you are a permanent resident of Canada.

Additionally, being a permanent resident gives you the opportunity to become a Canadian citizen after only three years of living and working in Canada.

Once you become a citizen, you can run for political office, become involved in political activities, and vote in elections. You can also maintain duel-citizenship, so you don’t have to give up citizenship in your home country just to enjoy the benefits of Canadian citizenship.

Using Your Website to Build a Brand

Defining your brand as a company and creating a consistent branding message is a key part of marketing for any company, big or small. A brand is a symbol of your company, and as such should be represented throughout all marketing and promotional materials that you use to build your brand. Your company website is a building block of that branding process.

What’s in a Brand?

A good brand should be able to stand alone without an explanation. Big corporations spend millions of dollars on their branding campaigns so you know who they are simply by seeing their brand. What do you think of when you see a white and red target symbol? How about the golden arches? Those two branding symbols are a part of everyday life in America, and known to millions as the brand for Target stores and for MacDonald’s burger chain around the world. Even if you don’t have millions to spend on an advertising and branding campaign, you can still work to ensure that your branding message is clear throughout everything you do.

Building Your Brand Online

Whether it’s only through traditional media sources, or primarily online and through social media, the look and feel of your company should carry throughout your message. Hiring a professional web design company to help with this is a good idea. Keeping a consistent message through your website take a lot of time and effort, and having professional help allows you to focus on your business.

Be Consistent

Consistency cannot be overrated when building a brand. In fact, it’s essential. Websites should have consistent colors throughout that match the colors of the brand. Those colors reinforce the look and feel of the branding symbol. Target’s store website is primarily red and white colors. These are subtle things that the customer may not even realize is being influenced by. Any good professional web design company knows who to use appealing colors for your customers.

Use Your Logo

Use your logo as much as possible in your online ventures. Make sure your social media ventures also mimic your brand and logo design of your website. Decide on what size of logo is appropriate for your website, and keep that consistent throughout. Even if you don’t keep a professional web design company on permanent staff, these are tricks of the trade you should know in case you need to be the one to maintain your own website.

2014 Jeep Patriot Gets New Powertrain

Fans of the Jeep brand will be excited to hear about a new model that the company will be unveiling. The 2014 Jeep Patriot will prove to be a worthy addition to some of its predecessors, since it will feature an all new powertrain. This is causing it to draw in a lot of attention to the brand, because some people will wonder what other additions will go along with it. There are a few different inclusions for this model, which will feature some of the best updates Jeep has provided in years. Longtime fans of the brand will be pleased, but it may also draw in a new audience due to some of these features.

First, most people interested will inevitably want to take a look under the hood when they get started. This model is fitted with a 2.4 cylinder engine, which is a useful addition that many people may be able to expect. This can help many people get linked up with the right kind of engine that they need for their daily commute. It will offer up to 172 horsepower with the transmission that it features. This is a considerable amount of power, which is likely appealing to customers as well. If they buy the new model, they will get linked up with the brand new 2014 Jeep Patriot powertrain as well.

There are a number of other features that will accompany the 2014 Jeep Patriot powertrain. Some people may want to consider whether they can get linked up with this model, thanks in large part to its fuel efficiency. There are many people who have wanted to get better fuel efficiency from this class of vehicles. The new Jeep Patriot will be able to get 21 mpg on the street and 28 mpg on the highway. This may be appealing to many consumers out there, who want to maximize the amount of value they want to get from their vehicles. They should think about getting this car sometime soon, since it could save them a substantial amount of money in the long run.

This will also function as a new SUV in the Jeep lineup. It will offer some roominess for the passengers and a little bit of cargo room. It may not have the interior space of larger model SUVs, but it does offer a lot in return. It has a smooth and comfortable ride, which appeals to many people. The vehicle will also need to sacrifice some size, since it will need to maintain the fuel economy that it features. But its small size will likely be appealing to many consumers, who might be growing tired of large size SUV models out there.

In all, there is a lot to expect from this new release. Many fans of the brand are hoping that it will revamp the image of the Jeep and make it accessible to new consumers everywhere. Some buyers may want to talk to their local Jeep dealer about what it may offer to them. The standard model will come with the new powertrain, but there is an upgraded class that some may be interested in getting. This will introduce an even more improved transmission, which will offer more fluid shifting capabilities. Though it may not have the size that other SUV models have, the Jeep may just carve out its own unique niche for consumers out there.

electronic cigarette

Here at eCigWizard we try to offer the most popular products on the electronic cigarette market. We stock a wide and varied range of goods from all over the world.

We try to listen to you, the customer, and find out what you actually want. We act on EVERY product request we receive. Quite often this may not lead to us actually stocking the item (for a number of reasons) but you can rest assured that we will at least attempt to.

Our products vary in price; however, we test the majority of our products before we post them to you.

This obviously takes more time but it hopefully results in you receiving a fully working product each and every time. Sometimes things will slip through the net. On these rare occasions we will endeavour to deal with your problem as swiftly and kindly as possible. We pride ourselves on our excellent customer service skills.

Some vendors can get quite touchy when customers provide constructive/negative feedback. We are the opposite; we crave suggestions and constructive feedback. This may sound odd to you as a customer but we want to do the BEST we can for you, so please do nitpick and provide us with as much feedback as possible (obviously positive feedback is also welcome!).

Choose Us

At eCigWizard we appreciate that you have a wide choice of vendors to choose from both in the UK and further afield.

As mentioned above we take great pride in everything we do, here are some reasons why we feel you should place your order with us:

Great shipping rates both within the UK and Europe.
Free shipping on UK orders over £10.
Fantastic customer service.
We are available at the end of the phone.
Our products are fully tested before being shipped to you.
We generally despatch our products the same day you order them.
Quite a few of our items cannot be bought from other vendors in the UK.
You will not find any exaggerated claims on our products pages.
We are a fully registered Limited Company in the UK. In addition we are VAT registered and have full registration with the ICO.
We are active in the electronic cigarette community and always strive to help with any matters which may impact the community.
Our team

At this moment in time we have 3 full time employees. They are all directly employed by our parent company INX-Network LTD.

And here they are:

Our Office

We have a base in Cambridgeshire which carries most of our back office functions. Our office is generally open from 10am-5pm Monday-Friday.

You are more than welcome to “pop in” and say hello/collect your order. Please just drop us an email/give us a call in advance so we can make sure we aren’t out having lunch or posting customer orders!

Our office isn’t quite a Vaping Lounge yet but we do have some comfy seating, free drinks and of course you can have a look at some of our products and have a vape with us!

The Importance of Portable Appliance Testing

Portable Appliance Testing in Tottenham – or PAT Testing in Tottenham – is a necessary part of employee training or appliance inspection for all companies and self-employed individuals, as well as schools, hospitals and various other environments and sectors. Tottenham, a rich and diverse business area of London, and therefore must do its utmost to be compliant with the testing and inspection of their electrical equipment if it’s used by staff or customers.

With the introduction of Electricity at Work Regulations (1989), guidelines came in concerning electrical equipment. Adhering to regulations may require attending Health and Safety courses. When it comes to maintaining and inspecting equipment, qualified individuals – either within the company or an outsourced electrician – may carry out portable appliance testing to ensure that all equipment used by the company or body is functioning the way it should.

Individual employees should be made aware of potential hazards when it comes to the use of portable appliances. For example, if a plug’s wiring is loose or frayed, the equipment should not be used and the designated member of staff informed. Faults should be reported to management, and signage posted over equipment to prevent its use by others. Other techniques, such as the inspection of appliances for any signs of damage, can also prevent accidents or reduce the risk of work-related fatalities. Employees may be trained to spot potential problems before starting to operate portable machinery. In this way, the risk of electrical fires and other accidents is averted. Statistically, many of the accidents and incidents logged by health and safety authorities could be avoided if quick visual checks are carried out by employees on portable equipment. These matters – and more complicated issues that may arise when it comes to the use of electrical equipment – may be learned by employees at courses given by Health and Safety compliance bodies that deal with PAT Testing in Tottenham.

The Electricity at Work Regulations 1989 compels those who use electrical systems and their employers to maintain those systems to a practicable degree in order to prevent danger. Other regulations include those from Europe: The European Low Voltage Directive concerns the manufacture or importation of electrical appliances. This aspect of the law is overseen by Trading Standards. However, it is important that equipment remains safe while it is being used.

Portable appliance testing involves both preventative maintenance and corrective repair, although the former is paramount. Checks that are carried out on electrical appliances depend on a large number of factors. The number of times a device is used is significant. The risk that an appliance develops faults probably increases when it is used on a daily basis. However, those devices that are only used very infrequently may develop a fault while they are not in use. Environment may also play a factor. Portable appliances used on a building site will be prone to infiltration by dirt and dust, while those used on a hospital ward must be kept hygienically clean without fear of circuit failure due to exposure to cleaning agents. There are numerous factors that play a part when it comes to PAT Testing in Tottenham.

Extended Stay In An Arizona Golf Resort

If you are looking to spend an extended amount of time in Arizona, whether it’s for business or pleasure, you should definitely consider an extended stay AZ golf resort or hotel. If you’re in town for business, staying at a golf resort will allow you to enjoy your hobby in your free time and make the trip feel less like “work.” Not to mention, it can also ease those pangs of missing home and the ones you love and help the work days go by a lot less painfully. When you know you have something fun and exciting to do after a hard day’s work, it makes work a lot more rewarding.

If your trip is solely for pleasure, an extended stay golf resort offers a great vacation option for you and even your family. Whether you all are experienced or novice golfers, you’ll find courses for all levels of expertise at most resorts. What’s even better is that you can play at your own comfort and skill level and at your own leisurely pace. After all, extended stay golf resorts are all about relaxation and fun. Find a place that you and your family would enjoy to stay at with many activities you can enjoy together.

Most extended stay AZ golf hotels and resorts offer reasonable rates on package deals for golf games plus boarding and accommodations as well as a wide range of other activities and perks. There are usually lavish spa treatments available to treat yourself to as well as delicious food to sink your teeth into and options to enjoy a bit of nightlife as well. The great thing about these types of resorts is that you can play all day and then usually not have to go very far to find something to do at night that you enjoy. And if you’d prefer to retire to your room after a fun day of golfing, that’s ok too. The rooms are usually comfortable and very homey, truly making you feel like you’re in your heavenly home away from home.

Whether it’s for business or pleasure, AZ extended stay golf resorts offer the right amount of fun and relaxation to provide you with a very cozy extended stay. Relax at a golf resort for as long as you want with the feeling of being at home as well. Enjoy a vacation in an Arizona gold resort with your family.

Home Remedy for Minor Burns

Minor burns, although scary and painful, can be treated with natural home remedies. As long as the burn is a surface burn only, there are several alternative solutions that can prevent infection, soothe pains, stop scarring and help in healing. Alternative remedies such as milk, tea, honey, cool water, lavender oil and yogurt have been used for some time, and are easily accessible.

Yogurt

Yogurt can help soothe and cool down minor burns. Apply two tablespoons of yogurt directly the burn, wait 15 minutes, and then remove. Plain yogurt is recommended, but flavored yogurt will work as well.

Honey

Honey is an old remedy for a multitude of things, including minor burns. Honey will also sanitize minor burns by drawing out fluids. Place a few drops of honey directly on the burn, then place a bandage over the infected area. A gauze bandage works well, and should be changed several times daily. With each bandage change, a few drops of honey should be reapplied.

Black Tea

The tannic acid in black tea works to help draw out the burning heat from a minor burn. Tea bags should be placed under cool, running water while collecting the tea liquid into a bowl or glass. Then simply sprinkle the tea water onto the burn. This can be repeated as often as necessary.

Milk

Milk works to soothe minor burns and alleviate pain. Take a clean cloth, soak it with milk, and apply it to the burn. Repeat as often as needed for pain relief, washing the cloth between each application. Alternately, the burn can also be soaked in a bowl of milk for at least 15 minutes.

Water

Cool water can help tremendously with minor burns. Not only does it cool down the burn, but it can also help it from spreading. Run cool water over the burn as soon as possible. Hesitating in using water will increase the risk of infection and pain. Run the cool water over the burn for at least 10 minutes, and repeat as many times as desired.

Vinegar

Vinegar works as a purifying agent as well as an astringent for minor burns. Dilute one-quarter cup of vinegar with two cups of water. Pour the liquid over the burn and do not rinse it off.

Lavender Oil

Lavender oil will not only soothe away the pains of a minor burn, it will also help in the prevention of unwanted scarring. Rub the lavender oil generously over the burn and leave it on for at least 15 minutes. Apply again as many times as needed. Be sure to rinse off the oil before each application.